Bài báo khoa học
STT Tác giả Tên bài báo Năm xuất bản Nhà xuất bản
1 Le Xuan Hung, Vu Ngoc Pi, Tran Thi Hong, Le Hong Ky, Vu Thi Lien, Luu Anh Tung, Banh Tien Long

Multi-objective Optimization of Dressing Parameters of Internal Cylindrical Grinding for 9CrSi Aloy Steel Using Taguchi Method and Grey Relational Analysis

2019 Materials Today: Proceedings, Volume 18, Part 7, 2019, Pages 2257-2264, https://doi.org/10.1016/j.matpr.2019.07.007
2 Hoang Xuan Tu, Nguyen Quoc Tuan, Le Hong Ky, Tran Thi Hong, Luu Anh Tung, Jun Gong, Vu Ngoc Pi

Determination of optimum exchanged grinding wheel diameter when external grinding stainless steels

2019 Materials Today: Proceedings, Volume 18, Part 7, 2019, Pages 2345-2352, https://doi.org/10.1016/j.matpr.2019.07.018
3 Le Xuan Hung, Tran Thi Hong, Le Hong Ky, Nguyen Quoc Tuan, Luu Anh Tung, Banh Tien Long, Vu Ngoc Pi

A study on calculation of optimum exchanged grinding wheel diameter when internal grinding

2019 Materials Today: Proceedings, Volume 18, Part 7, 2019, Pages 2840-2847, https://doi.org/10.1016/j.matpr.2019.07.151
4 Xuan Hung Le, Thi Hong Tran, Van Cuong Nguyen, Hong Ky Le, Thanh Tu Nguyen, Thi Hong Cam Nguyen, Khac Tuan Nguyen and Ngoc Pi Vu

Calculating optimum gear ratios of two step bevel helical reducer

2019 International Journal of Applied Engineering Research ISSN 0973-4562 Volume 14, Number 16(2019) pp.3494-3499, Scopus Q3,https://www.ripublication.com/ijaer19/ijaerv14n16_05.pdf
5 Le Van Quynh, Tran Thi Hong, Bui Van Cuong, Le Xuan Long

Analysis of dynamic wheel loads of a semi-trailer truck with air-spring and leaf- spring suspension systems

2019 Journal of Physics: Conference Series and submitted for indexing by big databases, including EI Compendex, Scopus
6 M. Y. Nguyen, Tran H. Hoang, Quyen V. Toan, Le M. Anh

Analysis of the Penetration of Distributed Generation in Distribution Systems Based on Modified Monte Carlo Simulation

2019 International Journal on Energy Conversion (I.R.E.CON.), Vol. 7, N. 3; ISSN 2281-5295
7 Hoang Anh Tan, Le Van Quynh,, Nguyen Van Liem, Bui Van Cuong, Le Xuan Long, Vu The Truyen

Influence of damping coefficient into engine rubber mounting system on vehicle ride comfort

2019 VIBROENGINEERING PROCEDIA. NOVEMBER 2019, VOLUME 29
8 V. V. Thang, Thanhtung Ha

Optimal Siting and Sizing of Renewable Sources in Distribution system Planning Based on Life Cycle Cost and Considering Uncertainties

2019 V. V. Thang, Thanhtung Ha (2019), Optimal Siting and Sizing of Renewable Sources in Distribution system Planning Based on Life Cycle Cost and Considering Uncertainties, AIMS Energy, 7(2): pp. 211–226.
9 Nguyen Khac Tuan

IMPACT OF ROAD SURFACE ROUGHNESS AND ENGINE TORQUE ON THE LOAD OF AUTOMOTIVE TRANSMISSION SYSTEM

2019 International Journal of Mechanical Engineering and Technology (IJMET) Volume 10, Issue 02, February 2019, pp. 1752–1761, Article ID: IJMET_10_02_181 Available online at http://www.iaeme.com/ijmet/issues.asp?JType=IJMET&VType=10&IType=2 ISSN Print: 0976-6340 and ISSN Online: 0976-6359
10 Dang Van Hieu

A New Approximate Solution for a Generalized Nonlinear Oscillator

2019 International Journal of Applied and Computational Mathematics, (2019) 5: 126. https://doi.org/10.1007/s40819-019-0709-9
11 Nguyễn Văn Chí

A method to determine the optimal parameters for PID controller

2019 International Journal of Engineering and Applied Sciences (IJAES), Vol.6, p.9-11, ISSN: 2394-3661
12 Nguyễn Trọng Toản; Nguyễn Nam Trung

Auto-tuning controllers of a class of plants using gradient descent algorithm

2019 International Journal of Engineering and Applied Sciences (IJEAS), Volume-6, Issue-6, June 2019, page: 5-8. ISSN: 2394-3661
13 Nguyen Tuan Anh, Hoang Thi Kim Dung, Nguyen Thi Phuong Nhung

Adaptive Cross-Correlation Compression Method in Lossless Audio Streaming Compression

2019 International Journal of Engineering and Applied Sciences (IJEAS) Volume-6, Issue-3, March 2019; ISSN: 2394-3661
14 Nguyen Nhu Hien;

Motive Control for Two Axes of a Radar Station

2019 International Journal of Electrical, Electronics & Computer Science Engineering. Vol 6, no. 3, pp. 1-6. E-ISSN: 2454-2273 P-ISSN: 2454-1222
15 Han Thi Thuy Hang;

Study of seismic behavior on multi-storied buildings with square composite columns

2019 International Journal of Engineering and Applied Sciences (IJEAS),Volume-6, Issue-5, May 2019, pp 24-27. ISSN:2394-3661
16 Nguyen Tuan Anh, Han Thi Thuy Hang Guang Chen;

One approach in the time domain in detecting copy move of speech recordings with the similar magnitude

2019 International Journal of Engineering and Applied Sciences (IJEAS) Volume-6, Issue-4, April 2019, pp 11-13. ISSN:2394-3661
17 Mai Trung Thai;

Optimal control for a distributed parameter system with delayed-time. Application to onesided heat conduction system

2019 International Journal of Electrical and Electronics Engineering © 2019 by SSRG - IJEEE Journal Volume 6 Issue 5 ;Year of Publication : 2019; ISSN 2348-8379
18 Van Nam Bach, Duy Khanh Pham, Tuyet Hoa Thi Nguyen;

Design of the automatic warning device for running generator

2019 International Journal of Engineering and Applied Sciences (IJEAS), Volume-6, Issue-6, June 2019; ISSN 2394-3661
19 Tran Minh Duc, Tran The Long and Pham Quang Dong; ISSN 0954-4062; Scopus Q2

Effect of the alumina nanofluid concentration on minimum quantity lubrication hard machining for sustainable production

2019 Journal of Mechanical Engineering Science, https://doi.org/10.1177/0954406219861992, pp.1-12
20 Tran Minh Duc, Tran The Long and Tran Bao Ngoc;

Effectiveness of alumina nanofluid on slotting end milling performance of SKD 11 tool steel

2019 Journal of Computational and Applied Research in Mechanical Engineering (JCARME) DOI: 10.22061/jcarme.2019.4041.1484; ISSN 2251-6549; Scopus Q3